To be most effective, solar panels need a South, West or Southwest facing orientation. We can use an East facing orientation; however an arrays output will be reduced by about 15%.

Permit and zoning laws vary from jurisdiction to jurisdiction. In most cases, both a photovoltaic and/or wind generator installation will require an electrical permit. In addition, wind generators are sometimes subject to review/limitations by your local zoning board. Our company permits the installation through the city and also walks the rebate application through your utility company. Every installation TXSPC does is done above and beyond code requirements.

The national average for a photovoltaic system installation is approximately $9.00 a watt. In most cases TXSPC is able to provide turn-key system installations for < $7.50 per watt. Things that can affect cost are site conditions, installation requirements, permit and zoning requirements and electric company requirements.

We recommend that you search the Database of State Incentives for Renewables & Efficiency www.dsireusa.org to see what available in your area. We also recommend checking with your electric utility company to see what incentives they may offer as well.

TXSPC does not offer financing options.  Banks, Credit Unions, and financial services companies are beginning to see the value in solar on homes and businesses.  Most are willing to loan amounts for solar installations and give you a payment less than or equal to your electric bill savings.

Payback is direclty related to your system size and configuration.  We assume that energy costs remain the same over time (a conservative assumption).  Most grid-tie systems with a rebate will break even after 4-9 years depending on usage and peak power consumption.  Non-rebate systems can take anywhere from 9-16 years to fully repay.

Texas Solar Power Company (TXSPC) has been installing renewable energy systems since 1995.  Although our owner has been doing installations since 1993. 

The North American Board of Certified Energy Practitioners (NABCEP) certifies installers on a national level. It is specific to a person, not a company, and is a required certification for solar installers.   TXSPC's owner has his professional NABCEP certification along with our lead installer and engineers.   Our installers have their basic NABCEP certification.

Solar panels are warrantied for 25 years and inverters usually carry a 10 year warranty. Solar panels are designed to last 40+ years; however, after 25 years they are expected to lose about 20% of their output capability.   Our installation is warrantied for 5 years.   Once the installation is inspected, the system becomes a part of the home and is now covered as a 'fixed structure' under your homeowners insurance in case of "Acts of god" or other unforseen events.

TXSPC specializes in the design, installation and maintenance of renewable energy systems. Our services focus on photovoltaics, wind generation and battery backup systems.

If panels are mounted on a roof that needs to be replaced, the panels will need to be removed and reset once the new roof is installed. TXSPC will do this work for a straight labor fee.

In short, yes! Under the Energy Policy Act of 2005 (Sec. 1251), all public electric utilities are now required to offer net metering to their customers. Under net metering, consumers who generate and export electricity to their electric utility’s grid are entitled to receive financial credit for at least a portion of that electricity.  With a large enough system you could have a zero utility bill.

Solar panel systems (or solar energy systems) use Photovoltaic (PVl) cells to convert sunlight into direct current (DC) electricity. Solar panel cells are made from silicon and were originally developed to power spacecraft and space stations. The cells are wired together in panels that typically measure about 4 feet by 1 foot by 1.5 inches deep. A group of solar panels mounted on a frame is called a solar panel solar panel array. To provide electricity reliably and safely, solar panel system components typically include an inverter, wiring and optional battery storage and charge controller. Most solar panel systems convert the DC electricity that is produced by the solar panels into the common household form of electricity—alternating current (AC)—by using an inverter. AC electricity can then be used to power your appliances directly, or feed back to an electric utility's grid. The DC electricity can also be stored directly in batteries for later use. In this case, to prevent overcharging or discharging of the batteries, a charge controller is used. Please visit our How it works page.

For more information please Contact Us or visit our Links page.